Tip:
Highlight text to annotate it
X
It's getting thick
Its growing in thick
Its looking sweet, aint it
I cant think of nothing to say, NOTHING
Shootz brah
Im acting like CeLo with my animal
during an interview
Hey buddy
So whats up guys, I just wanted to give you a quick little tutorial
on layering stain. Kind of like i did on the top of that wave desk, on the outside,
where I had a couple different colors, sanded it just a little bit,
and then layered it. It gave it a kind of cool look. So I just wanted to give a tutorial because to go along with
that desk the person wanted a little storage area to go up under the desk
for the supplies and stuff like that.
So i just whipped up this little storage unit
Its just a box with a shelf and its got some wood slats in the back
and its got some little castor wheels on the bottom so it can out from under the desk.
It was a simple little project so I'm not going to waste your time showing you how to build this thing. I'm just going to show you
how I finished it. So, to get started I went ahead and did the
inside a solid color because I'm not worried about layering it on the inside. There will be baskets in there so I'm not worried about that.
As far as supplies,
you don't really need that many,
at the minimum you need two different colors of stain.
I have that dark Kona and that sun-bleached that I will put on top.
I have the Polycrylic to
seal everything up.
You'll also need just a #220 girt sandpaper just to lightly
sand it
and then just a staining rag so you can rub in the stain. That's it as far as the supplies go.
To get started I'm going to go ahead and put tat first layer on which is going to be the Kona, the dark brown.
I'm just going to put in on,
let it dry and then go from there. I usually use a rag but you can use a sponge brush or you could
just use a regular brush.
The reason I like a rag is because I tend
to have more control over the the stain when I apply it.
So, that's why I like using a rag. What I end up doing is I just
cut down a t-shirt into a small square. What I don't want is to
have a big huge rag where I'm worrying about controlling the excess or anything like that. So I take
a little rag
and I what I do is wrap two fingers around,
get it wet with stain, and then I can really control it just using the two fingers.
So that's the method I tend to use.
All right, so I just finished that first coat of Kona stain and even though
I plan on putting a second coat just on the outside part
i want to go ahead and lightly sand it because
even though I'm going to be covering it with more stain,
this kind of starts the process of it having that cool layered look. Where it has some
darker spots and lighter spots. What will happen is
I'll go ahead and lightly sand this. I'll actually
sand away some of this first coat to where
a lot of the
bare wood underneath is exposed. So when I put that second coat on
the places where it still has
some of this dark stain, it will get darker, and then it will stain some of the places I sanded
it will be a little lighter. What it will do is start giving it that
texture look.
So, I'm going to lightly sand it real quick
and then
put another coat of this Kona stain on the outside.
All right, I just finished up that second coat of Kona stain and I went ahead and lightly sanded it
again.
As you can see, what I was doing was just putting more pressure in certain areas than others and it was getting it
down to
the bare wood
and it gave it a streaky look which is exactly what I was going for. Now I'm done with that step
and now I'm going to do the final color, sun-bleached, which is like
a light grey color. On this color
what I plan on doing is I'll just
apply the stain and then as soon as I put it on just immediately just wipe it off.
I don't want to much of it to stay on there but I do want a little bit of that color.
So I just finished up the grey and as a last step
i went ahead and went over all of it with a #220
grit, lightly,
just blending the grey and what I ended up with is this streaky wood grain look.
I think it looks awesome! So I'm
finished with everything on the outside
and the only thing I left to do is to put a coat of
protection on. I'm going to use Polycrylic
on the outside, gloss. I really think gloss makes this effect really pop
and look cool with the shine. So I'll put a gloss on the outside and just a
satin on the inside. I didn't really do anything to the inside so I want to keep the look subdued. So
that's the last thing I need to do and then I'll be done.
*music*
So, there you have it, that's layering stain and as you saw it's super easy
even he could do it
This dudes huge isnt he, I bet he weighs like thirty pounds. He's so fat
He doesn't like being called fat
what you mad now? why
you fat I called you fat? All right buddy see you later.
why you so mad dude
why you so mad
goofy cat
I guess I'll see you guys later.
Later dude, later
Later tater.