Wires in there

Today on this 2008 Chrysler Aspen we will be installing part number 118390 from Tow Ready. This is a T-One wiring connector. To begin our install we need to open up the hatch to get to the plastic...

Today on this 1996 Chevrolet Lumina we are going to install part number 18252 kit. What we have to do is hard wire it on to the existing harness, it is not a plug in or anything like that. At least we...

Today, we're reviewing Hopkins, part number H20042. This is a seven-way molded trailer wire connector. It's three feet long. You have red, brown, green, and yellow 14-gauge...

Today on this 2006 Dodge Charger, we will be installing wiring harness part number 118404. We are in the trunk area of the Charger here and we want to go ahead and locate the port for our wiring...

What we have here is a 4 pole flat car end, 16 inches long and includes 4 wiring caps. This is going to be installed on a 2005 Ford Mustang. We need to get the access to the wiring. So the first thing...

Today we are going to install part number 118461 from Tow Ready, and we are going to install this part on a 2001 Subaru Forester. The connection points are inside the vehicle, in the rear, so we have...

Today on this 2001 GMC Safari we are going to be installing four pole harness part number 18002. We are in the rear cargo area of the Safari here and this particular vehicle has a factory installed...

Today on this 2004 Saturn Vue we are going to install part number 18002 from Tow Ready. On this vehicle we are going to attach it to the factory tow package. We will get in the back of the vehicle....

Today we are going to install part number 118366 from Tow Ready on a 2000 Ford Windstar. To get started, what we want to do is go ahead and lift up the tailgate and start taking off the passengers...

This Tow Ready 4 way flat trailer connector is hardwired to the vehicle to provide a trailer connector powering the running lights, turn signals and brake lights on a trailer. This demonstration will...