Tip:
Highlight text to annotate it
X
Today on this 2004 Saturn Vue we are going to install part number 18002 from Tow Ready.
On this vehicle we are going to attach it to the factory tow package. We will get in
the back of the vehicle. The tow package is located inside the vehicle on the driver side
behind and below the jack storage compartment. Then we will remove the jack itself. Follow
this wiring harness down a little ways. You can see the tow package wires themselves.
There will just be bare ends of wires right here. 00:33
When you pull out the tow package wiring you are only going to get these five loops right
here. The black color is going to be your ground, the green is going to be the right
turn signal, the brown is going to be your running lights, yellow is going
to be left turn, and the light blue wire is going to be reverse lights. We are installing a
4-pole flat
so we do not need reverse lights so we will just take that
and put it out of our way. If you want to verify the functions of the wires which is always a good idea. 00:58