Tip:
Highlight text to annotate it
X
Today on this 2008 Chrysler Aspen we will be installing part number 118390 from Tow
Ready. This is a T-One wiring connector. To begin our install we need to open up the hatch
to get to the plastic rivets that holds the tail lights in place. The tail lights have
to come off because our wiring connections are behind the
tail light themselves. We will go ahead and
start by taking off the tail lights, we will just use a pair of pliers
to pull out the plastic rivets and we will go from there. This is going to be our connection point right here and what we are going to do is just unlock
it by pushing this little red tab up and out of the way, squeeze right here and it will
come apart. Lets go ahead and set our tail light down and we will go ahead and do
the same thing back over on the passenger side.