Tip:
Highlight text to annotate it
X
Today on this 2006 Dodge Charger, we will be installing wiring harness part number 118404.
We are in the trunk area of the Charger here and we want to go ahead and locate the port
for our wiring harness. The ports are located directly behind the tail light assemblies
here inside the trunk compartment. So we need to go ahead and remove the interior carpeting
here to gain access to those. To do that we just need to remove the screw here on both
sides of the vehicle and we just pull that back. You see once we do that, right in the
back of the tail light assembly is our connection point. As you see there is a red tab here
at the top. We want to push that over and then there is also a button here at the top
we push that in and disconnect the two like so. 00:41
Okay then next we will take our wiring harness and plug it in line. Over here on the drivers
side we want to use the ports that have the yellow and brown wires in them. And actually
we want to remove this middle threshold piece as well. Were going to hide the wires behind
there that are going to be crossing over to the passenger side. Then over here on the
passenger side we just want to do the same thing. You will also notice on the passenger
side we have a ring terminal on the white wire and that is going to be our grounding
wire. What you want to do is find a mounting suitable location for that ground stud. And
then we will just take and secure the remaining parts of the wire using the zip ties
that are provided with our
wiring kit. 1:24