Sanding

O.k, so now that we've actually you know, prepped and filled it and it's nice and hard, you want to make sure that it's really hard, I mean if it's too, if it's...

JASON HARRIS: Hi, I'm Jason with ExpertVillage.com. And today, we're making a bracelet out of wires and cable, just things we've found lying around. To this step now, we need...

Hi, this is Jon, and in this clip we'll be doing our final sanding. For my final sanding, I'm first going to take a piece of 60 grit sand paper, and I'm going to wrap that...

We also offer a floor facelift. Now this would be for any floors that are just kind of old, dull and tired. That need what I call a good drink, a good drink of urethane to make them look uniformly wet...

Please find this product at https://absupply.net. This video is to bring you a closer look at Fastcap FAFASTBREAKXL hand sanding accessory hand sander. This is for chamfering, putting a chamfer on the...

When we're dealing with the fretboard itself, we'll have to use different kind of files. A good flat file, of various lengths, will be very good in order to make sure that our frets...

this is steel city's new 55105 combination bench top disc and belt sander this unit has an 8 inch disk cast aluminum table and a miter gauge included the table can be pivoted all the way down...

Hi this is Jon on behalf of Expert Village in this video clip I will be showing our procedure for sanding. After our mud had dried for 24 hours we are ready to sand our wall. Now you could either use...

In this next step, we’re going to sand this spot. When I am doing my office I knew that I had certain things that I had to do, and the first thing I did was blow insulation because this is an older...

Hi! This is John on behalf of Expert Village. In this video clip, I will be talking about our final sanding and our final inspection. After letting our third coat dry for 24 hours, our transition from...