Alright, moving on with the bunraku arm control. The next thing that you're going to do is sand a little bit off of this metal hasp joint. This is really cosmetic. But I like to do it because...

1

annotations

So I've just cut this tube, this metal tube, on my band saw. That's mainly because I can't find my little pipe cutter. I bought this brass tube and the pipe cutter at a model...
Now we're going to prep our board for our hand mirror. I've had it cut with a jigsaw into the pattern that we made. And you want to decide which side is going to be the front of your...

1

annotations

Now we need to sand all of our pieces of wood. You want to take off all the rough edges. And the easiest way is to just lay your sand paper on the table and actually rub the wood on to the sand paper....
We're ready to start sanding now and since I'm using a belt sander, I've set up a backstop on my bench to hold the board in place. If you don't do this, the belt sander...
Hi, this is Jon on behalf of Expert Village in this video clip we would be sanding our pieces. When sanding our pieces we just want to start by sanding the outside of our frame. You can flip it over...
Alright, so here we have the original board with the two fin gashes and what we are going to do now is this is a sand finish so all we need to do is finish the board. This is the last step and what we...
Okay, we've got everything filled now and we're ready to sand the front to even out these little imperfections that occurred while we were putting the case together. I'm going...
Okay, so here we have our board, it's laminated, it's hot coated, it's dry and this board is shiny, which is a gloss and polish. So we have one more step on this one, which is...
-All right, now we're going to talk about blocking your body filler out. It's already had body filler applied. Dent's been repaired, body filler applied. Blocks come in...