Tip:
Highlight text to annotate it
X
Please find this product at http://absupply.net. This video is to bring you a closer look at
Fastcap FAFASTBREAKXL hand sanding accessory hand sander. This is for chamfering, putting a
chamfer on the edge, so you have a square edge on your door or plywood or whatever you're
working on. This is an exaggerated view. This tool will put a chamfer, as you can see. Doesn't look that excessive
at all, its very light. It just breaks the edge of doors, plywood, or whatever you're
working with. Having machined a lot of wood doors myself. This is a nice tool that I've
used because when you have a door let's say a residential door or a commercial door and
you are going to plane it get it pretty fit down to the size that you want, put a bevel
on it. The edges are quite sharp and they are intended to be broken or chamfered slightly.
This tool is very comfortable in one hand and is very appropriate for use in that area.
What's nice about it is you get a very uniform sort of break to the wood that you are working
on when you use a tool like this. Place it on the edge and uniformly and evenly slide
it across, perhaps back depends on the wear pattern and how worn the sandpaper is that
you are working on, but it's very comfortable in the hand as well, at least in my hand.
It's got grooves on it to improve the gripping ability of your hand, super comfortable, durable
in the shop, long lasting. If you've got a shop with more than one guy what happens is
everyone is looking to use the tool if there's only one of them. They are one of those things
that gives a better net result and employees want product to be seen in the best light
possible and this tool helps provide that sort of end result. Removable end caps, and
what that means and I won't take both of them off of this brass nut here, allows you to
house additional pieces of sand paper. And right from the factory it's going to come
with some more. This is a cloth backed sandpaper that you would see and it reminds me of a
sanding belt, quite durable. You would want to use something like that, not a paper backed
sort of item. You would want something durable; you don't want to be cutting into the plastic
base behind here. Ok. It just slides in so you are going to want to be sure that you
are cutting your sand paper to very precise dimensions when you refill your tool, so to
speak. Nice little carrying case. Great quality tool dollar for dollar, it's nice if you're
doing door work which I'm mostly familiar with, it's just a nice tool. Will work for
thicknesses from 3/4" to 2-3/8". You're going to between a 3/4" and probably a1-3/4" or
a 2-1/4" door for thickness. Good quality item. If you have any questions on the Fastcap
FAFASTBREAKXL hand sanding accessory or any other Fastcap product, please feel free to
reach out to us. Thank you very much.