Tip:
Highlight text to annotate it
X
I decided to do a follow on video to my
making picture things on an oscilloscope
using a VGA port. This time I decided to shamelessly use the hackaday logo
which is basically just the SVG and I stripped the path from it and then told
to just
draw the lines between all the segments. That was actually surprisingly easy.
So one of the things I realize I did not do my previous videos
was show you each other channels look like. For instance let's look at channel
one
so channel one is this right here.
You can see that what's actually going on is it's drawing from the
left side the screen to the right side of the screen
and the hackaday logo because this is the x-axis
in this is the time axis is spinning around
the center of X. It's around
half from the peak to peak voltage and for Y
you can see that it's drawing at the top of the screen and then drawing different
parts the hackaday logo
the the four wrenches and then the center part
one piece at a time. And that little down there is just what's left over at the
end of the frame.
So thats how this picture
is made. Hope you guys liked it!