Tip:
Highlight text to annotate it
X
Hi band of Communists! With Teutonics, we learn while having fun!
SHUT UP *** ! You make plagiarism, you'll be in jail, we'll tie you to the radiator and we will f*ck yo...
There is less clever now eh?
Hello everyone and welcome to this new video review. Today I will present you to the AGM MP40. Yes, I know, I've already made it, but this dear Youtube robot decided to *** me off. I made this video a year ago now, and the problem is didn't kept the rushes at this moment. So I make a new one. And at the end of the video, I offer you a kiss.
No kidding, I'm not momosexual I'm already Maumauser is not bad...
Yes, but "Repliques du Grenier" has already made a video. So go see the description for the link, that's fine, bye, see you next time!
Again, I must warn, I wear the German uniform because I have a German airsoft gun. I will not amuse me to present a German replica being dressed like this:
Hi YouTube, today I present the AGM MP40. This is a beautiful weapon Nazi. Hun ***.
(any resemblance to a real person is purely coincidental ) (LOL Do you sii ow I manege it! Brad Pitt would be ridikulous!)
Before the release of the AGM MP40, also called MP007, (no relation to you know what), there was only one MP40: TOP MP40. And as its name does not indicate it really was not TOP. But in terms of aesthetics, it was really beautiful.
When it was available, it was between $600 and $700. It is very difficult to find (it's a collector's item). His power is 134 fps, beware!
AGM still had any interest in taking this replica as model to make a better copy!
One day, perhaps I'll present it, when I'll have strongly abused with soft drinks.
As you can see, I added a conversion kit MP38 of SHOEI brand. It is still available, but expensive. $ 250, but it changes with the eternal MP40! You can see the differences between the two models of weapons were streaks on top to lighten the weapon, but it made it more difficult and expensive to manufacture. We have the magazine eject button: here a form of large screw. It has a hole here. Another small difference: the flash hider has not hollow as it has on the classic MP40.
The cocking lever is also different: it's not a pin but a sort of hook.
This is my airsoft gun!
No, it's mine. Get off my back!
Also know that the flash hider is sold separately, don't forget it when ordering! Note the presence of an instructions paper very well done and friendly, allowing you to easily mount the kit.
When you receive this airsoft gun, you'll get the MP, a 50 BB's magazine, a battery (*** quality)...
NEO, STOP YOUR JOKES (*** QUALITY)!
This is well said! But I won't stop.
And a battery charger that should not be used unless you want to burn your house.
My battery is empty! I kindly reload this wonderful battery to allow me to shoot in all innocence BB's on a target of course!
There are three versions of the MP40. By the way: whether AGM or SLV Cybergun, the replica is the same. So everything is compatible, don't ask me anything about it!
The first: black grips. The second, bakelite color grips, and the third with black grips and without fire selector. Yes, before there was a fire selector. And it looked like this:
This version has been customized by Custom Jet sold on WGC at the time, and this version no longer exists for years. There was a very small amount of manufactured, and I remember having had problems at the beginning: the switch was no longer physically present outside, but it was still on the Gearbox. So sometimes it changed to semi alone! A little disassembly allowed me to understand the problem and I stuck the switch in "full" position.
The MP40 was released in 2008! It's been 6 years... damn its old..!
But since I am amused to repaint grips, because with original photos, we can see that the grips were brown - colored bakelite top and black on the handle.
Let us return to the switch selector. Why did they do that? WHY have they added this useless thing? While on the model that was used to create this replica, namely TOP MP40, there were not!
So that now, when we see an MP40 which has a fire selector, we know immediately this is an airsoft replica and from AGM.
The replica has a length of 63cm without the butt and 83.3 cm with butt. This stock has a significant advantage for support. But its main drawback is it move as an IKEA furniture assembled by a blonde !
It's like the real one!
No, not so much.
It additionally gives a very ugly sound, it looks very cheap. There is another point to watch: the pins on the butt, which tend to go away. I already lost one, so I suggest you stick now. If you ever lose a pin, you can replace it with a nail stuck in the hole, then cut flush, which will then be repainted.
This has an electrical safety MP40 which is located under the handle. It is a simple ON / OFF switch, but effective, and can save the eyes in the neutral zone.
The strap can easily find on Internet for a copy, it's not too expensive. Perhaps you'll have a little problem to insert here but it's normal!
The weight is almost 2925g: lighter than the real that was more than 3.5 kg. A little pity, but we can do nothing.
For power, it is 320fps, which is quite reasonable. Very original, no need to downgrade as the AGM MP44. But about the range… It's difficult to reach 30 meters, even by blowing on it!
And it is as accurate as a watering can. It is always possible to change the internal, except the hop-up unit which is, in my mind, specific to this model.
If I'm wrong, correct me.
Hans correct me, I have done a mistake!
There are two types of magazines: those who make 50 BB's capacity: they are metal, easy to find and not too expensive, between $20 and $25 each. So it's easy to make stocks.
But there are also mid-cap magazines: in plastic, 110 BB's, manufactured by King Arms and they are quite difficult to find. (It's a pity!)
To remove the upper part and access the battery and gearbox, there is a small button to unlock below, which is sometimes a little hard, and slowly dismantled. On the real, it almost comes apart like that, there is the same little button, but you have to turn before pulling.
Be careful when handling the upper part, avoid damaging the nozzle. It would A PITY.
As you can see, the Gearbox is aluminum color, but I put a black cover here (it's a piece of visit card that I colored with black marker and I stuck) since the Original kit, you can see the gearbox by rail space for the cocking lever.
You don't need to do this manipulation if you have the Shoei kit because you can't see anything. There are even more rail is really A PITY.
Whether the origin or the MP38 kit, you cannot put the replica safe realistically. (A PITY!)
About the battery, we have the place here, we can put Li-Po, 8.4V, 9.6V, there is everything that fits!
New problem (I didn't mention it in the first version of this video. A PITY!): It's the trigger. I met 3 MP40 AGM. We have talked together, it was very good, and after quite fired, and there comes a time when something has broken... A PITY! On one, then the other, then the last. Too triggered. After I asked a lot of questions about my ability to shoot, I came to the following conclusion: TRIGGER IS ***!
After disassembling, I was the small pin used to maintain the rod for transmitting the movement of the trigger to Gearbox is ZAMAK! And zamak, as usual, this is crap!
So the trick is to make an hole in the trigger, put a screw that is long enough, but with a fine head (the trigger have to move whereas the bakelite grips are in place) to wedge the rod!
It has a small fuse in the handle, so if you have an electrical problem, there is one chance in two that it comes from there.
If you want to remove yourself the selector, manipulation is quite simple, but it will completely repaint grips to hide the work. You have to take a plastic card, make a small circle, glue together the hole in the selector's hole, putty if necessary, and paint over. Don't forget, as I said earlier, block Gearbox lever in the "up" position to be able to block the shot burst.
Basically, the replica has no marking, after you are free to add yours. On the Shoei MP38 kit was small markings here and there is a small "S".
"Sicherheit"
Security
Safe
***!
It was another small drawback. I know, I'm just talking about the disadvantages, but value for money is the best on the market.
Whether on the original kit or Shoei kit, the screw on the cocking lever unscrews, and if you stick the screw, the metal will twist...
Because your jokes make us so laugh we twist
Or... I have a twisted mind!
So only use this cocking lever in case of absolute necessity. Offenders will be liable to prosecution. Oops, wrong video...
So avoid playing with and pretend to ***. You should to take a Marushin MP40 (or Denix ) for this!
When you install the MP38 kit, you place the plastic part that comes in reinforcement in the loading wells. And you'll realize that there is no hole in the plastic! We'll have to make it yourself! Careful handling must be done meticulously with the dremel. One false move and you'll end up with a broken plastic part! And I wish you good luck in finding one in spare...!
The sling can be swapped, but it must be removed the entire front. Finally, I think you know this manipulation, it's not the first time I present MP40!!!
About magazines: For the TOP MP40, we must put the loading wells towards the front of the magazine, but we have to put back for the AGM. It is for this reason that TOP magazines (for which we could find Hi-Cap ) are not compatible with the AGM MP40! Not even talking about the SRC magazines...
These magazines often fall. So be very careful, the fault of the replica, which is used to this part. To lock my magazine, I have to tape like crazy! Must go free! (Must go "Franco" - in French)
Another small drawback with magazines: spring for locking the BB's in the well is very soft.
A bit like my ***
So mishandling, and the entire magazine is emptied as... as... I prefer not to say anything actually...
We will now do a firing test on a target at about 15m.
I hope you have enjoyed this video. If this is the case, don’t hesitate to share it on your Facebook wall, your twitter account, by mail, by fax, Minitel. Yes, fend this out yourselves!
As for me, I look forward to seeing you soon for a new video review! If you like the MP40, please put a blue thumb for this video. For my part, I like M.P.netration with my...