Tip:
Highlight text to annotate it
X
New from Messer Cutting Systems...the MetalMaster Plus.
The Metal Master Plus is Messer Cutting Systems fastest and most accurate unitized plasma
cutting machine.
Unitized means no floor rail installation,....a smaller shop footprint and faster installation.
With high speed rack and pinion AC drives, coupled to low backlash precision gearboxes
propel the Metal Master Plus to seventeen hundred inches per minute with a positioning
accuracy of plus or minus two thousands of an inch over any six foot square cutting area.
This provides precise motion and a very stable cutting platform.
Plate widths of six, eight and ten feet and plate lengths up to fifty feet.
The Metal Master Plus offers rugged construction to withstand the harsh environment of multiple
high current plasma systems. A typical six by ten foot cutting machine weights approximately
three and a half tons.
The reinforced aluminum beam and steel endtrucks provides a rigid gantry. This design creates
an excellent platform for higher acceleration providing better holes and sharper corners
With the Metal Master Plus you also have maximum flexibility. You can choose to have the operator's
station mounted on the left or right side, whichever works best with your shops workflow.
The heavy duty table is designed to handle up to two inch material and up to two four
hundred amp plasma systems,
The Metal Master Plus comes with a standard zoned and ducted table to extract harmful
smoke, and our patented Slagger design. The Slagger blade pushes slag through the table
allowing for faster table cleaning. This table also uses an energy efficient dust collector
system- so your shop is cleaner and more efficient. Our precision plasma system with high-speed
programmable lifter and built-in automatic electrode wear compensation, ensures consistent
cut quality throughout the entire life of the electrode. The lifter utilizes the "Safe
Raise Height" feature in the "Global Control Plus" to further increase productivity by
allowing machine motion while the torch is fully retracting.
While cutting, the magnetic collision sensor protects the torch in all three axes.
To find edges or locations -- use a laser pointer or our video camera as an alignment
tool. Capture points along the edge of the plate to align the part program to the same
angle as the plate. Both simplify setup-reduce cycle time & eliminate scrap.
The Metal Master Plus lets you cut and mark with optional processes. A marker can be added
to reduce manual marking and increase productivity. Choose an air scribe, rotational ink-jet,
or pin stamp to provide marks for bend lines, drill points, or weld locations.
An optional Fiber laser, ALFA oxyfuel torch, drill and shuttle table can be added as well.
With the Fiber laser option, parts can be cut laser only -- plasma only -- or a combination
plasma and laser allowing for the processing of metal from gauge thickness to two inches
with best quality and lowest cost.
Our easy-to-use Global Control Plus interface with familiar screen layout and on-board material
database allow operators to set up quickly with minimal instruction and cut high quality
parts time after time - so any operator will quickly master the machine operation. And
with it's onboard database it makes every operator an expert.
A standard part shapes library and nesting software is included. Software enhancements
are available for the life of the machine.
Messer Cutting Systems provides worldwide technical support to help you get the most
productivity from your machine. We maintain a thoroughly-trained Service Department that
provides phone assistance, parts, machine repair, and preventative maintenance.
With the push of a button, machine service and applications support can also be carried
out by our "Virtual Service" program This utilizes remote diagnostics over a high-speed
internet connection, so a service or applications person can view your machine function in real
time to assist in troubleshooting machine functions or assisting in cutting applications
Messer has over one hundred years of world-wide experience in the thermal-cutting machine
industry, combined with our customer-first philosophy, is our foundation for offering
a superior line of machines.
Peformance...Speed...Accuracy...Built in the U.S.A.
The Metal Master Plus.... A superior machine that provides high speed and high quality
cut parts....from Messer Cutting Systems.