Tip:
Highlight text to annotate it
X
To install your Nokia Lumia Icon into the case
first remove the case from the holster style belt clip. Push up on the tab on the holster
and pull out on free side of the case.
You can now remove the outer slipcover. Free one of the edges,
and then work around the case removing the entire cover:
be sure not to pull from any ports or plugs.
Now separate the two halves of the hard shell by releasing the clips at the top and then on the side of the case,
pulling the two pieces apart.
You can now place the device into the back half of the case.
Then snap on the front piece making sure all the sides firmly snap together.
now wrap the silicon cover around the shell.
Work the silicone onto the shell making sure all the ports and plugs are properly seated.
It is recommended when using the holster to place the device face in to protect the screen,
however the holster does double as a stand.
Place the device into the holster face out,
then lock the belt clip into the out position.
You can rotate to the desired viewing angle.
To release the belt clip from the stand configuration, pull out on the tab at the top of the clip.
There you have it, the OtterBox Defender Series.