Tip:
Highlight text to annotate it
X
This is a FoamMelt 180 show you the panel. The system ready lights on just scanning through
all of the heating zones. We've go a pressure control right now is at
7 or 6 close to 6 anyways. Pump control at 805. The gas set at about
two pounds. We have it hooked up to a Nitrogen bottle.
Ahh we have it set at thirty pounds going into the machine. Now going to show you the
density reduction on the on the fuller glue. Right now we have this is a fuller glue with
no foam straight glue no foam We did another one here ahh about five minutes
ago with foam at twenty one grams. And we are going to demonstrate one running.
So again we have 21 grams which is about a reduction of a sixty per cent.
Going to do one more. Again this one is 20 grams. So we have a good reduction on the
on the glue. We are now going to show you a bead or a few
beads and as you can see it is foaming quite well.