Tip:
Highlight text to annotate it
X
Logic Board Removal
To begin, grab you case opener tool or a flat head screwdriver.
And remove the cabling from the Logic Board.
There are four cables that need to be removed.
Once this is complete, now grab your phillips head screwdriver
and remove the phillips head screws from the Logic Board.
Once this is complete, now get your case opener tool,
or a flat head screwdriver,
and gently lift up on the Logic Board on all sides.
This should lift up and out.
And the iSight camera will be attached to the Logic Board.
This simply snaps off.