Tip:
Highlight text to annotate it
X
so this is our new instrument VideoCAD Rapid
This is a 2D optical
measurement device with a big field of view 50
of 50 x 60 mm so components like this
can be placed on the measurement field and immediately
we see it on the screen so now you can see the component on the screen
you see it's live you can see it and
now we can start the actual measurement here we have the main
menu bar and if I want to measure a line
I just click on 'please measure a line'
I click on the line I want to measure it automatically collects 120 data points
I see it's done and now I can collect
all live elements over component I want
to meaasure.
automatically they appear here in the list
of elements in the same I can with radius I just need to click
radius then I say please measure this radius and circle
and the software automatically collects all
the radii I have
and if I am happy with the measurements I did, I click on this window
and then I am in the graphical evaluation window
and if I'm interested in a diameter of the circle now
which I can see here are the results I can also give
the graphical result presentation click on the element
and now you see here the diameter of the element
this element
this element and of course I can also do
distance measurement and if I want to have the distance of the component
from
here to here I just click it - say yes -
- now you see hear the distance
and also I can make the graphical evaluation which gives me
the distance between the two lines - and the same of course
also works with an angle
now
I can also choose here
the dimension
so what you see here is the graphical
result representation but I also have the chance to look into more detail
so lets say
I'm interested in this element here I can click
on this element and we get more detailed information
to it
that means here you get an indication of the form
you have measured you even get here the form
of the measurement which is 8 micron but it will also give
here then nominals
that means if the diameter of a circle should have been
2mm I type 2mm
say 'done' and I can also give tolerances
to this so here I can give upper tolerance of 0.2
micron and a lower tolerance of 0.001mm
and say 'done' 'done'
and now you see this circleis
out of tolerance and the result presentation is given
in red. If I now go back to the graphical review
you see also here this element is clearly marked in red
and you see immediately this circle is out of
tolernace. This is the graphic a result of course we also have
then the result presentation in excel format
you immediately see again the diameter
out of tolerance and I have here
some more possibilities to export- export into excel, you can have a text
file and here you can also then import DXF
for full comparison. To start a measurement sequence
is just to press this button to say start
then you just need to click once on the component
and then the instrument automatically
aligns the component and does all the measurements
which you have done before
After the program is finished this is the graphical
result presentation you see immediately which features
are out of tolerance and you also can switch
to the pure report which gives you
only the features which are out of tolerance or
are close and in tolerance. this you can print out or export
to excel as well.
in