Tip:
Highlight text to annotate it
X
Hi I'm Mark, one of the founders of Wire By Click and I just want to take a minute of
your time today just to show you our products and how they work.
The first solution I want to talk to you about is our 5-pin solution, which is essentially
for smart lighting and intelligent lighting like DALI. We have two products which make
up this total installation. We have a starter, which is the only termination you'll do on
the whole installation for each circuit. We then have the pre-made fly-leads that are
2, 3, 4 and 5 metre lengths. That length is usually determined by the distance between
your light fittings... and then these simply click together. That click replaces your termination.
We then have a 5 pin plug-top which is fitted to the lights, usually at the point of manufacture.
That then plugs back into that backbone.
The next solution I want to talk to you about is our 3 pin solution. Basically it's the
same philosophy as our 5 pin, it has a starter and fly-leads that make up the loom. The big
difference with this one is it is for standard lighting and it is a replacement to standard
plug-n-socket looms. It uses a non-propriety plug-top, and by simply clicking it together,
again you're replacing terminations in that loom.
The next solution I want to talk to you about is using our products for temporary wiring
and how the modular nature of them allows you to do that. It's the same backbone that
we use for 3 pin with the Wire By Click footprint, and by plugging in an adaptor with a round
pin earth and a propriety plug which can be fitted to a temporary light-fitting, you now
have the perfect temporary lighting solution that can be reused again.
I just want to talk about a couple more products and how they add benefit to our base solutions.
The first one is our switch adaptor. By plugging this into a loom, you're now creating a situation
where you' have a switched and unswitched outlet. This wired back to a switch then allows
you to switch anything that's plugged into this side of that outlet.
The second thing I want to talk about is the integration of our 3 pin and 5 pin and the
ability to do that. What this allows you to do, with our 5 pin in particular is now future-proof.
By future-proof I mean you can run a 5 pin backbone with the intention of maybe having
DALI down the track, and using a 3 pin adaptor, you're able to use that solution for standard
wiring.
The final product I want to show you is the mounting mechanism of our products. 80% of
the time it's on catenary wire and we have a feature here for cable ties to be cable-tied
to catenary wire. Alternatively if you need to hard fix it, we have a mounting plate that
locates in that same cable-tie feature that allows you to fix it with two screws to a
hard surface. So that's a very quick overview of our products. For more detail on the specific
solutions, have a look on our website there's some great short videos. Thanks for your time.