Tip:
Highlight text to annotate it
X
The desired product. Notice the big area to be glued without bubbles...
That can be done with adhesive ACRIFIX® 1S 0117 together with the capillary activator
Two laser-cut parts of extruded acrylic, already annealed and without inner tensions.
Discard the protection foil on the inner sides which are to be glued together
Shake before use
Apply on whole surface of ONE part (the smaller one)
Wipe dry until milky pad is gone
Pad is gone, surface is clear again
Put parts together without pressure
Fill pipette with ACRIFIX® 1S 0117 adhesive
Adhesive flows between the parts AUTOMATICALLY through capillary effect!
Well done! Suck back the adhesive surplus into pipette
Discard outer foil
Nearly bubble-free, perfectly clear result.
This superior quality can NOT be produced with ANY OTHER adhesive system !!!