Tip:
Highlight text to annotate it
X
Welcome to the Angle Valve Product Training Presentation. Angle Valves are used in applications
that require a high number of cycles and where a full ported valve is not required. They
are normally less expensive than pneumatically actuated ball valves. The Ares and Zeus Angle
Valves have been tested to millions of cycles. The number of cycles depends on the duty cycle,
the pressure, the temperature, and primarily whether the media passing through the valve
is clean or has particulate present.
The Ares Valve has a 316 Stainless Steel body, plug and shaft with a self-centering PTFE
seat. The Zeus Valve has a bronze body with a stainless steel shaft and plug and self-centering
PTFE seat.
For liquid application the flow should be from 2 to 1 so the fluid flows against the
plug. This eliminates water hammering.
For gas and especially steam applications the flow should be from 1to 2
The Angle Valve has a NAMUR mounting pad which allows for direct mounting of NAMUR style
solenoid valves.
The Angle Valve products page provides you with links to all the important information
available. We will go through them quickly. * The Angle Valve Configurator makes the selection
process easy, and provides the price, model number and allows you to select the proper
accessories. If you add the selection to the cart you can then print a quote or email it.
* 3D CAD link allows you to download CAD drawings in a variety of different formats.
* The icons at the bottom of the page lead you to information on the steam, cross-section,
and accessories. The Interactive demo shows you how the Angle Valve works and flow direction
recommendations. * The literature section gives you links to
datasheets, price lists, and installation and maintenance manuals.
If you require specific information, visit the links or call our office for assistance
on Angle Valve applications. Thank you.