Tip:
Highlight text to annotate it
X
In this video, I’ll show you how to perform a channel scan, also known as channel programming.
Note that your TV must be connected to a cable or antenna source through the coax port.
If you use a cable box, you do not need to perform this procedure.
In addition, your particular TV might have a different procedure.
If these instructions don’t work for your TV, check your user’s guide.
If your TV’s menu looks like this one, follow this procedure.
Repeatedly press the INPUT button on your remote until ANT/CABLE is selected.
Press the MENU button on the remote.
Use the arrow buttons on the remote to select Settings and press the OK or ENTER button.
Select SETUP and press the OK or ENTER button.
Select ANT/CABLE.
Select either ANTENNA or CABLE depending on your setup.
Select AUTO TUNING and press the OK or ENTER button.
Select START SCAN to begin the auto tuning.
Progress will be displayed on your TV.
Once the scan is complete, the TV will display the lowest scanned and identified channel.
You should now know how to perform a channel scan on your Toshiba TV.
For more information, visit support.toshiba.com.