Tip:
Highlight text to annotate it
X
Wall mount brackets are an affordable solution whenever you need to mount rack mountable
equipment. We offer them in sizes between one and six rack units. The tools required
for the installation are a drill with a 5/16 drill bit, a Phillips screwdriver, hammer,
level, and pencil.
The first step is to make sure your bracket is level. Using a level, adjust the bracket
until you find the level point. Then mark, with a pencil, the holes that need to be drilled.
Drill out the holes in the places you just marked. Taking the provided wall anchors,
hammer them into the holes. Insert the screws with the washers into the anchors. Hand-tighten
and then finish with the screwdriver.
To install rack equipment onto the bracket, use rack screws and screw them by hand onto
the bracket. This bracket is designed with a hinge which allows easy access to the rear
of the equipment.
Wall mount brackets are an easy to install and affordable solution whenever you need
to put rack equipment but don't want the expense or size commitment of a full-size rack or
cabinet.