Tip:
Highlight text to annotate it
X
now i'm going to show you how i maintain my butane lighter in between refills and
how i refill my butane lighter the best kind of flints are corona flints they
come in this five pack with the brush
i'm going to use dunhill butane but you can use any butane that is triple or better
the first step is to bleed the tank
i use the built-in tamper as a screwdriver to remove the fuel cap
apply pressure to the refill valve to purge the lighter at any remaining fuel
or air
this is the most important step of the process
because it gets rid of all remaining propellant in fuel that could make your
flame jump When you clean it you're going to want to
make sure you get all the stuff off of the side
and you're going to use a wet paper towel
and what i do is just go along the edge
make sure to get
all of it
you can use a pipe cleaner to get in that hard to reach areas
i use the included brush
to brush the flint wheel
now removed the old flint
and use a pipe cleaner to clean the flint chamber
now get a new flint
drop into the flint chamber and replace the
flick the lighter a few times to give the new flint a good start
press the refill tip downward into the center of the refill valve apply firm
pressure for a few seconds
replace the fuel cap and wait a few seconds for the gas to stabilize
when the lighter reaches room temperature it's safe to use
thank you for watching please subscribe
questions and comments are appreciated