Tip:
Highlight text to annotate it
X
We have our pressure-volume loop.
And what I wanted to do is kind of explore this a little bit
further.
And kind of a nice place to start might be with the name,
right?
Pressure-volume, or PV loop.
And part of it makes perfect sense.
You've got P there, and you got V there, so there's your PV.
And the loop, one loop in this kind of sense,
is really going to represent one heartbeat.
So you're going to start at one point
and kind of go all the way around from systole
and diastole and back.
And so using our PV loop, the one
that we kind of drew together, let's
actually show where systole would be.
So if this is where we start, the red
represents all of systole kind of going on and on.
And this part is really quick, right?
Just a fraction of a second, 0.05 seconds.
And then finally, the aortic valve pops open.
And systole continues.
It's not like it just started there.
Systole starts with the initial contraction
of the left ventricle, continues through all of this,
and also on this part where the pressure is falling.
That's all systole.
In fact, let me label that very clearly
so it's clear that the red part is systole.
And then that leaves, of course, another whole half of our loop.
Although in terms of time much more than half,
because some of these segments take longer.
I'm going to do all this in blue.
And all this stuff in blue represents
diastole, the other half of the heart cycle.
So this is when the left ventricle is now relaxing.
So this is systole and diastole you can see kind of next
to each other on this graph.
So this represents one loop, or one heartbeat.
So sometimes, you hear phrases.
You'll hear the phrase end-diastolic such and such,
or end-systolic such and such.
So what do they mean?
Well, end-diastolic is literally what it sounds like.
It's the end of diastole, kind of where I drew an arrow.
And what they're really talking about is a time point.
So at that point in time, where diastole is done,
you have a certain pressure, or sometimes they'll
talk about end-diastolic volume, so I'm just going to write or.
But these two terms, end-diastolic pressure
or end-diastolic volume, are really
referring to a time point where diastole has come to an end.
I guess you could also say start systolic.
And that's kind of the same idea, right?
That's where systole is also beginning,
where diastole is ending.
But you don't really hear that term.
You usually just hear the term end-diastolic.
In fact, I think start-systolic is
a word I might have just made up.
So let me actually just erase that.
But I do want to point out that the concept would be the same.
Right, it's just a certain time point.
So end-diastolic pressure volume is that point in time.
And at that point in time, just remember
a few things are happening.
You've got, for example, the mitral valve just closed.
So I'm going to write mitral closed.
And if the mitral valve is closing,
also means the tricuspid is closing.
And of course, I'm going to put it in parentheses because this
is the pressure-volume loop for the left ventricle.
So we're not really thinking about the right ventricle,
but some of the events are going to be the same.
So the tricuspid is going to close at this point, as well.
And if the mitral and tricuspid are closing
you know they're going to make a noise.
They don't close silently.
And that noise we call the first heart sounder, S1.
And if you think more along the lines
of what it might sound like, we always
kind of think of the idea of lub.
You know that sound of lub dub?
Well, the lub part of it comes from the closing.
And now you can see on this loop where that might happen.
Now, on the other side, you've got
kind of similar set of stuff going on.
So you've got what we call end-systolic.
So if there's end-diastolic, you better
believe there's going to be end-systolic.
And this is going to be, again, pressure or volume.
So the pressure or volume part gets kind of confusing.
But just remember what people mean
when they say end-systolic-- all they're trying to get at
is that point in time.
And just as before, you could pretend to make up a term,
I suppose.
You could say, well, isn't that the same as start-diastolic?
And I suppose you'd be right.
But because no one uses it, again, I'm
writing it out just to kind of prove the point.
But I'm going to erase it so you don't get confused.
Because end-systolic is the term everyone
has kind of come to adopt.
Now, certain events are happening here, too.
You've got the aortic valve closing.
So this is the closing of a valve.
And you've also got-- although not here-- the pulmonary valve
closing.
So you could also say, isn't the pulmonary valve closing?
And the answer is yes.
And these two together make a noise, of course.
I'm going to write it right here, S2.
And this is the dub noise.
When we hear lub dub, now you can
see where the dub part comes from.
It comes from that second point on our loop.
So we've got a couple points on our loop,
and these loops are used all the time.
In fact, the main reason we use these loops
is because they convey so much information very, very quickly.
So for example, let me just show you
why we might use these loops or how they're useful to you
by showing you some of the information you
can glean from them.
So you can actually, for example,
take a look at these two numbers.
And you'll say, well, what is that?
Well, this is your pulse pressure.
And you might have heard pulse pressure before.
And usually the way we think of pulse pressure
is if someone says, hey, the ratio of your blood pressure
is-- I'm going to make this up-- 130/80.
That means that my pulse pressure is just
the two numbers subtracted by each other.
So pulse pressure would be 130 minus 80, or 50.
So this is just an example.
So this would be pulse pressure, kind
of the way we usually think of pulse pressure,
just your systolic pressure minus your diastolic pressure.
But looking at your PV loop, remember
this is not your aortic pressure, which
is what we measure usually in your arm.
This is actually your left ventricular pressure.
So left ventricular pressure is going to be very, very similar.
You've got kind of the low end right here,
and you've got the high end.
And the low end is really the lowest
that the blood pressure in the aorta is going to be,
and the high end is the highest that the aortic pressure is
going to be.
So your pulse pressure you can kind of figure out.
Using this loop, I would say, well, on this loop,
the pulse pressure equals 120, because that's
the high end right there, minus 80.
And so I would say my pulse pressure
equals 40 millimeters of mercury.
That would be my answer if someone asked me,
what is the pulse pressure on this PV loop?
So the cool thing is that you can actually
use these PV loops to calculate things like pulse pressure.
Now, another interesting thing you can quickly calculate
is this.
I'm going to just draw it with green, a different color.
And this is my stroke volume.
All that means is the volume of blood
that leaves my heart with every stroke.
So at the one end when my left ventricle is really full,
you've got 125.
And then, when it finally kind of squeezes as much
as it's going to, you end up with 50.
So my stroke volume is literally just 125 minus 50,
and that ends up being 75.
So if someone said, hey, what's your stroke volume here,
I would say, well, it's 75 milliliters.
So one final thing then-- I don't want to overwhelm you,
but I want to really point out all
the kind of interesting things you can learn from this PV
loop-- is what we call the ejection fraction.
Now, this is just the stroke volume, which we just
calculated to be 75, divided by what they call peak volume,
or total volume in the left ventricle when it's full.
I'm going to call it peak volume.
So in this case, what is the peak volume when it's 125?
That was the highest amount of blood
that we got into this left ventricle.
So the ejection fraction would be 75 divided by 125.
And notice that the volumes cancel.
So all you're left with is just two numbers over each other.
And in this case, you get 60%.
I'm writing it as a percent.
You could also say it's 0.6.
But usually, we talk about it in percentages.
So I would say the ejection fraction
using this PV loop is 60%.
So you can look at these PV loops,
and you can learn certain words like end-diastolic,
end-systolic.
You can calculate things like your pulse pressure,
your stroke volume, or ejection fraction.
So they basically give you a ton of information,
and that's why we always use them.