Tip:
Highlight text to annotate it
X
there is a kind of fashion for cutsom AiOs now + i already did one over 2 years ago (AGiO)
so i did those NZXT Alien custom AiOs alien because of their "phantom-like" shapes
this one is the 1010, it have a 24" 1080p screen and can stand 1x3.5" and 1x2.5" drives should be at ~250€
and this is the 1030 with a 27" 1440p screen and stand 1x5.25", 2x3.5" and 2x2.5" drives so, should cost ~500€ (if 1440p were at a decent price)
i made this turntable a little too far so it look smaller than the 1010 :/ but 1010 is 57x42x19cm and 1030 70x49x29 (with stand)
now you will see 1010 inside specs then 1030 ones
and i also did some special colors renders nothing special, just used actual phantom colors ^^ (last 1030 is full gunmetal)
and now, how to build your rig into those AiO took the 1010 here but it's the same for the 1030 (had to make a low quality render so it doesn't take 4 days)
to start, remove back cover, and screen from the arm then install the motherboard and PCIE card(s)
put screen the back plug everything (cables goes through the arm) then put the cover back
and at last, open the stand move the rubber strap out of the way, slide drives put the strap back, plug drives and done!
yes, this was very fast XD but i had to do this because rendering with that much models takes ages
i still have 2 things that would have vids + NUC competition on my grabCAD page but i won't be more for the holidays because of Transiscore (so, no Parallax 2.0 soon :/ )