Tip:
Highlight text to annotate it
X
now
for the setting of the device, after we get the prescription from the
doctor what's the best
level of pressure we need to use for the patient, we will set it
I don't recommend that the patient will play with the settings
because these settings have to be changed only based on doctor recommendation
okay okay now I will just make the settings as the doctor will tell me
and I'll ask the patient to keep following up with me because there's
in our device
an SD card. This SD card will record the patient data
during use of the machine. I will ask the patient to keep following up with
me every month
so every month I will download the data then I would get the report
and I will send the report to the doctor so the doctor can keep
following up with the patient.
if we need to readjust the pressure or what else to do with the patient
we have some recommendations we have to ask the patient to follow
every time before he uses the machine
now this will be more about the machine so
as I said before I will set the device
then I will inform the patient on
basic steps that he has to follow every night with the machine
mainly with the device
we have an attached humidifier. this humidifier
has a chamber. this humidifier
chamber has to be filled with water every night
are we talking tap water or does it have to be filtered water?
it is recommended to be distilled water. so fresh water every night
yes. don't leave the water if the
container has some water in it throw it out.
yeah it's better to have just fresh water every night.
then he will just put it back. it's not important if it's
cold water or hot water. It will be the same because we have
heated humidifier for the machine.
then, you have the tube. it's almost 1.8 meters long
so it's enough for the patient to move on his bed
also, it's 360 degrees, so the patients will feel very free to move as well.
and as a result of the movement this tube will not tear
or break or rip? no, it will not
mostly, the life for this tube will be between eight to twelve months
As for the interface as I said we have three types: the face mask,
the nasal mask, and the nasal pillow mask.
now for the face mask, as I explained before, it's covering
the nose and the mouth we have it in four sizes
small, medium, large and x-large
the nasal mask, we have it only as
small and medium and large and the nasal pillow, we have
small, medium and large all-in-one.
after this, we would prefer to try the machine on the patient himself
sure! ready? absolutely!
the face mask is covering the nose and the mouth. We have it in
different sizes, we have a sizing gauge to know exactly what's the size of the
nose of the patient and based on that we will give the patient
the required size. okay, so we have here the large size
we will put the mask on this way
we have a hook here so it's easy for the patient to remove it
just like this to remove it and just like this to put it on
now the mask is something that's very important to the patient
so the patient if he's using
and wearing the mask well then he will feel comfortable. if he's not
wearing the mask well
he will not feel comfortable then he will hate the machine
so what he has to do
is to tighten the straps
from both sides, upper and lower in the same level
this way. that's enough. it shouldn't be
very tight. also, the mask should be
at this point of the nose exactly
then
after that, we will just connect the tube to the mask
all you have to do is to breathe normally
breathe in breathe out