Tip:
Highlight text to annotate it
X
The ICS Impulse should not be performed on patients with a neck injury,
or on patients’ who have been told by their physicians to limit or avoid neck movement activity.
When you first start up your ICS Impulse system, you have 3 options when collecting data. You can use
a temporary patient file and then enter the patient information later
or enter New Patient information immediately
or you can open an Existing Patient File
Prior to placing the goggles on the patient, you need to make sure you prepare the goggles.
If needed, you can Clean the goggle housing
The goggle housing is made of molded plastic material which can be cleaned using a
damp cloth moistened with a mild detergent and water solution.
You want to ensure the goggles have a new, unused face cushion
To remove the face cushion, slightly flex the goggles out at the side opposite of
the camera side and snap out the face cushion. Release the face cushion from the other side.
Properly dispose of the used face cushion.
Obtain a new face cushion
Align the tab of the face cushion with the hole on the camera side of the goggles.
Ensure the face cushion is inside the nose piece.
Slightly flex the goggles at the opposite side, align the tab of the face cushion
with the hole in the goggles.
Double check both sides are fully inserted by pressing in at each side.
The next thing is you might need to clean the mirror.
Use the provided cleaning cloth and gently wipe the mirror on both sides