Tip:
Highlight text to annotate it
X
In an effort to build commercial structures as energy efficiently as possible,
energy codes and standards now require sensors in many commercial spaces.
You have a choice when it comes to what type of sensor to install—
either wired or wireless. For the Wired solution, you will need all
of the necessary equipment for executing wired terminations,
a relay pack and a remote-mounted ceiling occupancy sensor.
You will also need enough cable to run from the relay pack to the sensor.
For vacancy sensing applications, an energy code requirement that is becoming
increasingly popular, you will also need a momentary switch
and enough additional cable to run from the relay pack to the momentary switch.
But with Lutron’s Energi TriPak wireless option you’ll only need a Maestro Wireless
switch, which communicates with a Radio Powr Savr
sensor.
Since you don’t need any new wiring to install the switch,
or any wiring at all for the sensor, choosing Lutron eliminates the need to install
a relay pack and run wire. In fact, Lutron’s wireless solution reduces
installation time by up to 70% over wired options.
Because this solution saves so much time and material on each job,
you can win more jobs and earn more revenue. Plus, Lutron XCT sensing technology allows
the sensor to detect fine motions, such as typing, ensuring lights stay on when
the room is occupied. And that means fewer callbacks for you.
Let’s compare a typical wireless versus wired installation:
Lutron’s Wireless Occupancy Sensor Solution.
You’ll save almost an hour of time — per installation — going wireless.
How many additional jobs could you complete in a week,
using Lutron’s wireless solution? And how much more revenue would you generate?
This Energi TriPak wireless solution is available at your local electrical distribution center.
For other Lutron wireless solutions go to lutron.com/etp.