Tip:
Highlight text to annotate it
X
Hi this is Taylor and today we are talking about HP cartridges and how to refill them.
Our subject today is the HP 26 cartridge and how to refill it. Obviously, this is not an
HP 26, but a 29 is done in the same manner. The HP 26 cartridge, you will first need to
plug the bottom with a piece of tape. Covering this maze hole enables you to fill the cartridge
without it leaking everywhere. Once you have covered the maze hole, simply drill a hole
in the top of the cartridge, creating a space so that you can enter the ink. Then, with
a syringe needle, insert the cartridge with the ink, about 20 to 30 milliliters depending
on the cartridge. Once you have finished drilling and filling with ink, close the top with some
glue. Once you have plugged the top, now it is time to remove the tape from the bottom
and you will need to suck air out through this maze hole down at the bottom. Once you
have pressurized the cartridge by sucking out about two milliliters of ink, you will
be able to print.