Tip:
Highlight text to annotate it
X
Now, we're going to continue on with what we're doing here. So, as we can see, we have
her face. It's all masked up like this. We're going to go ahead and hit "Q," and quit mask.
And we see that we've got a little spot I've missed here. Let's go ahead and hit "Q" again.
Hit "Brush." Just going to paint this in real quick. There we go. Now we're going to have
a problem, though. If we go ahead and we paint this face, like we're going to, we're going
to be painting over and creating a hue-based slice right here in this area where her mouth
and the eyes are going to be. So, once again, after saving my layer here, I'm going to go
ahead and Control-Command-I to inverse that. I'm going to go ahead and view this layer.
As we can see, it's already up. I'm going to hit "W" for my wand tool. And what I'm
going to do is, I'm going to hold down Alt-Option. My minus sign will come up next to my wand,
and I'll just click it there. Oops. Control-Z. Let's actually select the right layer here,
my black and white layer, my alpha layer, as it would be. Command-Z there, Command-Z
there, and Command-Z there. Voila! That's going to take out that section there. So,
what we're going to do now is turn this layer back off. Now we're down here to a background
copy. So, what we're going to do is, we're going to do like we did before. We're going
to create a new layer. So, let's go to "Layer." And let's go down to, what was it? "New Adjustment
Layer." There we go. Go to "Hue and Saturation" again. Going to go ahead and hit "Ok." And
this is going to create our mask here. And what we're going to do is, we're going to
take this out to white, all the way white. And that's not really quite as much as I'd
like it to have. Already got our hues all the way up now. We'll say "Ok" to that. Now,
let's go ahead and turn our other layers back on. There's our blue, and there's our red.
We can turn out our-oops. Not that one. Turn on our black outlines. Now, our black outlines
aren't looking so good, but we're going to fix that. So, let's see. See if we got some
problems going on here. Let's go up here and look. We could probably do a little bit more
with the eyes here. And by doing that, we can actually go in here to this layer. So,
let's turn off this here. Let's go back in here to this layer. And we actually hit the
mask part of this layer. And, with our "X" tool selected... There, I hit "X" to select
our black. We're going to go into our brush tool, and we can actually brush some more
of this away, like so. Open them eyes up just a little bit. A little pink there. That's
quite alright. Alright. We'll stop here, and we'll adjust this a little, bit by bit, and
we'll come back to it in the next part.