Tip:
Highlight text to annotate it
X
Here are the models 4033 and 4034.
Both are 50 MHz Pulse Generators capable of generating pulse widths as narrow as 10 nano seconds.
Model 4033 is a single channel generator with its Sync Output on the front.
And Model 4034 is a dual-channel generator, with both signal outputs on the front panel,...
...and its Sync Outputs on the back.
The easy to use interface offers quick access to pulse settings by pressing the Parameters button.
The Parameters menu allows you to adjust the output pulses,
Period or Frequency... Pulse Width or Duty Cycle...
Delay, and Single or Double Pulses.
Pressing the Output button opens the menu that allows you to set the output amplitude limits.
Pressing the Pulse button opens the menu that allows you to set the output pulse's edges or transition times.
Pressing the Mode button opens the menu that allows you to set how the output pulses will be triggered.
Pressing the Setups button opens the menu that allows you to store and recall saved instrument states.
Pressing the Utility button opens the menu that allows you to select the interface type, display...
...intensity, and power-on options.
The Manual Trigger button is used to trigger the generator when it is in manual trigger mode.
On model 4034, the Channel button switches menus between the two outputs, allowing you...
...set each channels parameters independently.
The rear of the unit houses Sync-Out BNCs, Trigger-In BNCs, the Cooling fan exhaust port,...
GPIB and RS-232 Interfaces and the Line input with fuse holder.