Tip:
Highlight text to annotate it
X
Okay, now I am going to show you how to install the earth-ground wire.
[Here is the] simulation cold-water pipe,
grounding wire,
and our grounding clamp.
Basically what we're going to do is take the grounding clamp and
and attach it to the pipe
and then we're going to attach our wire to our clamp, creating an
earth ground.
So, the first step is going to be place it on the pipe.
Don't attach this to copper,
or softer pipes.
Be careful as you tighten it down to see how the pipe is handling the pressure.
Again, it should be snug but not overly tightened on the pipe. A cold water pipe
does work best for this.
Okay, now that we have it snug,
our next step is going to be to place the grounding wire
under the connection and tighten it down.
Congratulations, you have now successfully completed your earth-ground.