Tip:
Highlight text to annotate it
X
Here in this case we have our standard machine.
That's enormous size with the electrical engines too,
you can use it unlimited.
There is so many ways to work with it:
you can make it bigger and bigger or whatever you want.
You can put on some angles to use engines in angle or you can assemble, you can melt on it, wleding.
The weight is 7 tons just the machine.
So here we have a welding station, it melts on a small silver piece.
Here is our press, the forming tool, than we cut it and put it on a second part, it comes from behind.
And we assemble at there, there is a small engine and put it out at last.
So that is great, you can use different materials, you can assemble, and everything on one machine.
You do not need different machines, you can do it all in one and that is great.
You save time, money and have the products.
You can put the engines in every hole and to switch the positions is really easy too.
We have here electrical engines and is a main part is that we can
switch positions and the workways are really easy by our controls.
We can assemble many-many different materials, so metal to metal,
metal to plastic, nearly whatever you need and whatever you want.
If we produce and we have a problem, and want to produce special parts.
And a lot of companies say: "Hey, we can not solve the problem!"
I think Bihler is the best ...?