Tip:
Highlight text to annotate it
X
Hey everyone!
Jaystepher here today with a tutorial
on a flat screen TV with stereo gear
which is easy to construct and fun to build!
First let's construct the TV stand.
Start off with a 2 by 8 plate.
Next take a 1 by 6 brick.
Place it on top and in the back of our 2 by 8 plate.
Now use six 1 by 1 angle bricks or eyelet bricks.
Place them right in the front of our 1 by 6 brick.
And our last angle brick.
Now use to Palisade bricks.
Place one on the left and one on the right.
Now use a 1 by 2 plate.
Place it right in the middle of our 1 by 6 brick.
Take a 1 by 2 flat tile.
Place it right in the front of our 1 by 2 plate.
Now place two 1 by 2 flat tiles.
One on the left and one on the right of our 1 by 2 plate and our 1 by 2 flat tile.
And to finish off the left and right side,
two 2 by 2 flat tiles.
Now let's put some printed tiles on the front this for stereo gear.
Let's place the first printed tile right in the front.
Take another printed tile.
Place on the left.
And our last printed tile on the right.
You can use any type of printed tiles for your stereo gear.
Let's flip the cabinet over.
We're going to place four 1 by 1 studs.
Two on the left
and two on the right for legs.
Flip it right side up.
Let's take a 1 by 2 Technic brick with two holes
and a 1 by 2 flat tile.
Place the tile on top of the 1 by 2 Technic brick,
and the Technic brick right on top of these two studs.
That's going to be the stand for our TV.
To begin the construction of the television.
Start off with a 1 by 4 by 6 door frame
and ha piece a glass that fits inside of a 1 by 4 by 6 door frame.
Set the glass inside like so.
Flip the door frame over.
Let's use two 1 by 1 plates.
Place one on the right
and one on the left of our door frame.
Now use a 1 by 4 by 1 by 2 angle plate.
Place the angle plate right in between our 1 by 1 plates.
On the left, use two 1 by 2 by 1 by 2 angle plates.
Place one on the left
and one on the right.
Now let's construct the back of the television.
Use a 4 by 8 plate
and two minifigure back plates.
Place the back plate on the forth stud on the right,
and another back plate right above the previous back plate.
Now simply drop the 4 by 8 down like so.
And there we have our flat screen television.
Now simply set the TV on top of the Technic brick.
So we'll just simply drop these two studs down in like so.
Press firm.
And there we have it.
A flat screen TV with stereo gear.
We have Jay the Surfer.
It is a little large compared to the minifigure,
but who doesn't want a big screen TV in their living room.
And this wraps up the tutorial for the flat screen TV with stereo gear.
Easy to construct and fun to build.
Thank you for watching!