Tip:
Highlight text to annotate it
X
Hi, I'm Zach with Minka Aire and I'm here at Del Mar Fans & Lighting to show you how
to install the Minka Aire Concept II flush mount ceiling fan.
Verify that you have all of the parts and use the install manual as a guide.
You will need the following tools, a Phillips-head screwdriver, a straight slot screwdriver,
pliers, wire cutters, and a ladder. Turn the power off at the circuit breaker
box. Secure the hanger bracket to the ceiling outlet
box using screws, lock washers and star washers included with your outlet box and fan.
Hang the motor assembly onto the hook of the ceiling mounting bracket.
Connect the fan ground wire. Black wire to Black wire marked "AC IN L"
from the receiver. White wire from the fan to the White wire
marked "AC IN N" from the receiver. Secure all wire connections with plastic wire
nuts. Loosen the two screws that line up to the
key holes and remove the other two screws. Bring the motor housing up to the two screws
and lock in place. Install the two screws previously removed
and securely tighten all four screws. Insert the blades into the motor housing blade
slots, push blade until snug. Repeat process for each blade.
Install 1 100W medium base bulb. Raise glass shade up against bottom of fan
housing and secure it to the fan by twisting glass clockwise until snug.
What did you think of the Minka Aire Concept II flush mount install? Leave a comment below
to let us know your thoughts. Thank you for joining me here at Del Mar Fans & Lighting.