Tip:
Highlight text to annotate it
X
Okay, now we're going to connect this back in. Just always start it by hand. If there's
a resistance there's a problem. Don't just go ahead and force it. And just snug it up
slightly. Okay, now let me slide over here and I'll grab the air filter. And get that
into place. Make sure it fits just right, like so. And we'll go ahead and start to tighten
it down. There's a gasket around this--a foam gasket that you can to make sure is all in,
and nothing hanging over deforming it. Just a firm believer in taking care of your equipment,
and it will take care of you. Don't be afraid to snug that up. You don't want that vibrating
loose on you. Okay, continuing on. Take this cover and we're going to place it in here.
Boy, I love it when the plan comes together like that. It doesn't always just snap in
place like that. Then you're going to take--we've got all these snaps--we're going to go ahead
and snap them. There's one in the back. Got three on this side, and then we've got one
up front. The one up front you're not going to be able to see, because I can barely see
it, so I'm sure the camera won't be able to. But I will
lock it into place. Just like that. Okay, next we'll take and hook up this sensor that
we had taken off before. We just push this on. Okay, now I took this out of my pocket
where I had it for safe keeping, but this clip goes on here to keep it safe, so we'll
snap that into place, and that takes care of that.