Tip:
Highlight text to annotate it
X
THE FERRET: All right, now, that the neck is adjusted, we can moved on setting the individual
string height. Again, we're going to need an Allen wrench, and we've got two small Allen
wrench screws that are need to saddle. And what you're trying to do, basically, is match
the curvature of the neck with the way the saddles are setting down here, so that your
outer two saddles, are going to be the lowest and your next two go up slightly, and your
middle two are going to be the highest. So, basically going to create the same kind of
curvature at the bridge that you got going on with the neck. And you can usually do that
with siding it, looking at it. Again, string actions are a matter of taste, loosening these
screws are going to make the saddles go down. And if you find it, you're going all the way
down, and it's still not getting low enough action, you're going to have to use the screws
that lower the whole plate. Now in this guitar, it's going to be fine, I'm not going to have
to mess with those screws at all, because I really don't want to get the string any
lower than that, otherwise I'm going to start to get string buzz, but right now, I'm able
to play all the notes without getting any buzz, and it's neither too low, nor too high
to either play rhythm or lead.