Tip:
Highlight text to annotate it
X
All right so we'll start setting everything up. We're going to start here with the monitors.
What I have here are powered monitors, you'll need the power supply on these, especially
for the four track. For mobility and what not. And so you've go quarter inch RCA's coming
out of that into the RCA left rights. They'll go into our monitor out which is right here
in the back of the machine. The red is the right, always. We got that guy plugged in
here. Right next to it on line out which is for that final mix down. I'm going to same
thing here with the left right RCA's. That will be running into this this CD burner here.
Get that going. And generally, as far as like when the recording process starts I tend to
just do an acoustic guitar. So we'll run an XLR cable should be running to our microphone
here and see and the track one is designated as a left. I'm going to plug that guy right
here to the left input. We got that and that's pretty much it for the initial set up. You
can, like I said before, you could run a if you want to do an electric guitar that could
go into track one here. You just run a cable right to that to your guitar or bass or keyboard
and that's pretty much it as far as cable and setup.