Tip:
Highlight text to annotate it
X
Hi I'm Josh Ellsworth General Manager of Stahls' CADCUT direct.
If you want to bring dimension to your designs and customize t-shirts a little differently,
then you want to pay attention to the Special Effect material that
I'm about to introduce.
CADCUT Pebble Puff is our latest material out and it can be cut on any vinyl cutter
and heat applied with any heat press.
We sell this by the roll in 1, 5 and 25 yard increments.
The first thing you need to note is you need to remove the protective liner before loading
it into your vinyl cutter.
(music)
(music)
(music)
(music)
Be sure to follow the recommended settings on our web site on cadcutdirect.com.
Load your garment and preheat.
To remove the moisture and wrinkles.
Position your design...I've trimmed the design close so I can lay both pieces in.
Don't worry about the excess remnants on there; they won't apply over to the shirt.
Tack it down for the first hit.
The backing should pretty much just fall off here.
Then you want to cover the whole design with a cover sheet, then just hover the press against it for the
second time setting.
Which in this case I need to increase it to about 20 seconds.
And I have a completed garment.
(music)
(music)
As you can see, it gives you the pebbled puff texture throughout the design.
For unique looks with Pebble Puff, feel free to combine it with other materials.
I precut a 3M Reflective design that I'll press down first on the back of the hoodie.
And then we'll lay the Pebble Puff directly on top.
Once again, tack it down for the initial hit...cover it with the cover sheet...and let the heat
press platen rest down against it for the full second time cycle.
We have another completed part of our design.
(music)
So as you can see, CADCUT Pebble Puff is completely unique in what it offers.
Start showing it to your customers, in order to close more sales.
Buy online at cadcutdirecct.com.