Tip:
Highlight text to annotate it
X
Today on this 2012 Ford Taurus were going to install part no. 36492 from Draw Tite.
This is what the hitch looks like when it is installed on your car. Next we go ahead
and give you some measures to help you out selecting some accessories such as a cargo
carrier or a bicycle carrier. From the center of the hitch pin hole to the outside of the
bumper is going to be 4 inches. And from the top to receiver opening down to the ground
will be 10 and 3/4 inches.Now were going to show you how to have the hitches install.
First step is go ahead and lower the exhaust, put some lubricant- do this one first now
go and lower the muffler by removing these bolts for the hanger. Now we'll go ahead and
remove the faster 3 tabs from the bumper. These theyll be reinstalled when were done.
And now were gonna drill theses pods right here well drill 2 inbore holes here and here.
Our next step is go ahead
and install some hardware.