Tip:
Highlight text to annotate it
X
There are four questions which involve
opening the bonnet.
To open the bonnet on a Peugeot 207
you need to open the passenger door
and to pull the lever which is situated
near the foot well of the passenger side.
To open the bonnet OK there’s a catch underneath
which you need to push to the left
before you lift the bonnet itself
and then secure the bonnet in the up position
The first of the four questions is
identify where the windscreen washer bottle reservoir is
and how would you check the level.
The windscreen washer reservoir is
the top left corner of the engine
it has a blue cap with a little
picture of a windscreen
to check the reservoir
all you have to do is too ensure
that the level has been topped up
The next question is
open the bonnet
identify where the brake fluid reservoir is
and to check it has a safe level
of hydraulic brake fluid
on this car
the hydraulic brake fluid reservoir
is the top right has a yellow cap
and has the picture of the brakes
identical to what is on the dashboard
to check the level you must ensure
that the level is between the maximum
and the minimum mark.
The next question is
open the bonnet identify where
the coolant reservoir is and to check
that the engine has the correct coolant level.
The engine coolant reservoir is on
the left hand side has the black cap
and has a little picture of a thermostat
to check the levels you must ensure
it is between the minimum and maximum marks
The next question is to
identify where you would check
the engine oil level
and to tell me how you would check it.
To identify where you would check the engine oil level
you would use the dipstick
at this point you would then tell the examiner
how you would check it you would not physically do it
you would take the dipstick out
you would wipe it clean
you would then replace the dipstick fully
you would then take it out
and to make sure it is between
the minimum and maximum marks on the bottom of the dipstick
you will only be asked one question underneath the bonnet
once you've answered the question you will then close the bonnet
to close the bonnet
release the bonnet lid ensure that you put the brace back into its cradle
put the bonnet down and then press it so its secure.