Tip:
Highlight text to annotate it
X
Hey Guys and Welcome back on The Creative Simon
Toaday I want to show you this "Wireless" Button.
As you can see the Button has no redstone line that runs to the door but that doesn't matter because it will open the door with no problems.
And now Im stuck inside here ... Well I try to escape from here and then I'll show you how this mechanism is working.
YES I'm free and here is the circuit without anything around it.
Down here we have a hopper clock with a comparator that runs the signal around to this redstone wire wich constantly updates this piston.
If someone presses the Button up here the piston extends wich than causes the signal to go through this block into this condensator wich then holds the door open for some seconds.
Tutorial starts at 1:00
For this build you'll need a 2 lon 3 wide and 4 deep hole.
And 1 Redstone, 1 Redstone Torch, 1 Comparator, 1 Sticky Piston, 2 Hopper, 1 Button, Some Blocks, some cartpets and a repeater
Start by placing down a block in the middle of your hole and one over the ground with a button on it.
2 Under it your sticky piston with a block and 2 under the block a redstone torch.
On the right of it a block with your repeater on top. This will be your output from there on you can take it and put it wherever you want.
But for now it wont work. So grab your 2 hopers and place them next to this block facing into each other.
Place a item in it and place 2 blocks above the hoppers.
Place down a block here with your comparator facing in this direction.
A block infront of it with a block right here and redstone ontop.
Now we are done. Test it out and connect it to whatever you want.
I will connect some lamps right now but thats it. Oh and dont forget to cover it with carpet...
If you like this Video then please give me a "Thumbs up" and if you don't want to miss any of my future videos click on the Subsribe-button.