Tip:
Highlight text to annotate it
X
Hi, I’m Heather from AmericanMuscle.com, and I’m here to show you how to install
our pre painted Eleanor style louvers. The first step in installing these louvers is
to prepare the back of the louver with the 3M adhesion promoter, this makes sure that
the 3M tape stays stuck to the louver. Now that we’ve prepared the back of the louver
with the adhesion promoter the next step is to apply our 3M tape. Now that we’ve got
the tape on our louver, we’ll install the optional mesh grilles that are included with
the kit. We’ll start with the smaller grille, the first step is to cut an inch off the short
edge, and then we’ll make a 90 degree bend an inch from the long edge. After we’ve
done that we’ll make another 90 degree bend. Now that we’ve pre fit our smaller grille,
we’re going to move on with the larger one. You’ll need the included template, and use
the instructions as a guideline for where to cut. Now that we’ve dry fit our grilles,
we’re going to remove them, apply the adhesion promoter, and the 3M tape to hold them in
place. Next step will be to prep the surface of the car where we’re going to be applying
the louver. Now that we’ve prepped the car, and pulled the backing off our 3M tape, we’re
going to apply the louver to the car. And just like that, these louvers give your car
a more aggressive look.