Tip:
Highlight text to annotate it
X
Today on this 2012 GMC Sierra, we're going to install part number 75521 from Draw-Tite.
This is what the hitch looks once it's installed on the vehicle. Next, we'll go ahead and give
you some measurements that will help you out in selecting some accessories such as a ball
mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down
to the ground will be about 20-1/4 inches. From the center of the hitch pin hole to the
edge of the bumper will be about 1-1/2 inches. Our first step is to go ahead and remove the
existing 14-mm bolts bit into the frame rail. Next, we'll go ahead and point out the mounting
locations for the hitch. We'll spray it down with some lubricant and go ahead and clean
it out. We'll be using a tube brush. We'll be using part number 814092. Now, we'll go
ahead and show you the hardware will install into the hitch.