Tip:
Highlight text to annotate it
X
Hello so I'm going to show you how to add the additional 4.5 inches that we
require at the bottom of your design for the pop-up banners and so this I already
have opened up my design for the pop-up banner now these are going to be an
exact dimension and so it's going to be 31.5 inches for the width and 78.5 for the height and then once you have your design all
you're going to do is select the border of your design you can either do that by
pressing ctrl a or by using this tool right over here and then we're going to
create a stroke about two pixels is okay make sure the location is at the center
and then right after that we're going to go into the canvas size to add an
additional 4.5 inches at the bottom of your design and so 78.5
plus 4.5 inches it's going to be 83 inches and we want the addition of 4.5
inches at the bottom of the banner so we're going to want to make sure that
the image is on the top and the blank space is at the bottom and with that
you've added the addition of 4.5 inches at the bottom of your design and the
reason why we need this additional 4.5 inches is because of the way that our
stands are built so our stands actually have an adhesive that we attached a
pop-up banners to so this is the adhesive right here so we'll attach that
bottom the bottom of that banner right over here and then and about 4.5 inches
of that banner is going to go inside of the stand and so it's not going to be
visible whenever you fully put it in display and so if it did not
have that addition of 4.5 inches about 4.5 inches of your banner or your design
is going to get cut off at the bottom so in order to prevent that that is the
reason why we requested that you add that additional 4.5 inches and if you needed
the color to be a little bit different you can change the color at the bottom
if you want to but this is how you add the additional 4.5 inches thank you