Tip:
Highlight text to annotate it
X
All right, today on 2008 Pontiac Vibe were going to do a ofest fit a part number RG8015220
from Rhode Gear, this is the highway 2 bike carrier. Well start test it fit off by installing
the bike rack into the hitch. Well tighten it down the anti-rattle bolt and put the safety
pin on the other side.Now go ahead and get a couple of clearance measurements. On that
post to the bumper of the car as closest point will be 8". Okay, our ground clearance will
be 9-". Now, we'll go ahead and tilt the bike rack back and show access to the back of the
vehicle.All right, at this point well go ahead and load up the bike.
First thing we'll do is to make sure of the straps are out of the way for the cradles
we're going to use. Well set the bike in the place, bounce it out and then run the straps
over the top tube. And thats what it takes to load up a bike. And with that, that will
finish it for a test fit of part number RG8015220 from Rhode Gear on our 2008 Pontiac Vibe.