Tip:
Highlight text to annotate it
X
Hi we have come to introduce the new LucrOit 100mm filter holder a great advantage of this
system is that we can set it up all the system withouth tools, because it is screwless this
is the holder with everything unplaged and we found we have 3 kind of accessories for
different kind of filters first we are going to setup the 2 slots resin filters (2mm thick
filters) it is as simple as place the slots's legs on the hole and press it until it clicks
in the other side we make exactly the same, we introduce the slot, apply pressure and
it clicks with those simple steps we have our holder allready setup for using 2 resin
filters, 1 in each slot now we are going to change the resin slot for glass slots for
using 2 glass filters 4mm thick to quit the slots, is as simple as doing the reverse process
we did to set it up we apply pressure and remove the slots. For setting up the glass
slots, same process than before we put the slots's legs into the hole and slide it until
it clicks, for the second slot, we have to do exactly the same with those steps, the
filter holder is perfectly setuped for using 4mm thick glass filters the next element we
are going to show of the system is the adapter ring for this introduction we have 2 cameras,
1 camera has a Sigma 18-200 mm lens 72mm thread and another camera with a 24-70mm 77mm diameter
thread here we have the 77mm adapter ring and the filter holder it is as simple as threading
the adapter ring into the lens and for putting the holder we simply have to place it and
apply pressure until it clicks well we have used a 77mm adapter ring right now I have
a 72mm diameter lens then I am going to get the 72mm adapter ring I thread it in and it
is as simple as removing the holder and set it up on the new adapter ring no we have exchanged
the holder in a fst and easy way without using any tool other advantage of this system is
that we can put the lens cap with all the system allready mounted this way, we can transport
our equipment with the holder on the lens totally safe. Beside we can us circular filters
it is as easy as threading it into the adapter ring and this will allows us to use square
filters with circular filters. For this we need 3 slots (1 is sacrificed by the circular
filter) so we are going to take it off I keep the adapter ring but I only replace the holder
with 3 slots setuped the holder is perfectly placed, I screw in the filter again once the
polariser is screwed we can use a filter, in this case a Graduated filter simply putting
it in the slot the system is setup with the polariser and an aditional filter Another
characteristic of this system is the posibility to use a 105mm polariser over a holder with
2 or 3 filters in. In this case we have a 6 stop ND and I finish to put a graduated
filter so for putting the 105mm polariser I have to take it out of its cover where I
have it allready screwed into the adapter
and for putting it in the holder I only have to place it here and apply pressure until
it clicks now the polariser is setuped over the square filters. To take it out is as simple
as following the reverse steps we did before that wa we can take the 105mm adapter ring
out. With all this, we finish the new LucrOit 100mm filter holder introduction if you want
to get more information, you can find it in LucrOit website www.lucroit.com