Tip:
Highlight text to annotate it
X
Today I'm Going to show you how to create the swirl pool bracelet.Its totally new, cause
I invented it that's what it looks like. It's a single chain all the way down with loops
coming out of it. So first you'll need one loom, one hook, and your rubber bands, and
a c clip.I'll show you one. you could use what ever kind of clip that you want. s clip,
o clip, but the only one that we have is c clip, so that is what I am going to be using
in this tutorial video. Okay. Now we are going to learn how to place the bands onto the loom.
First, I'm gonna use red, your going to create a diamond shape. Make sure that your arrow
is facing away from you, not towards you, and make sure that the middle pin is out from
the other ones. Make sure that its not a perfect rectangle. So your going to stretch the band
from the bottom pin to the pins around it, and to the top pin that is above it. Now you're
going to push the that diamond down and you want to make- see this pins that is the top
it's gonna become the bottom of a new diamond. And this pin is gonna become the bottom of
a new diamond. And you're just gonna keep making new diamonds off of the tops of other
diamonds, all the way down to the end. Of the loom. (bands stretching) Make sure you
don't make an extra v at the top cause otherwise it will mess up the loops and stuff and it
won't work. Okay. Now you're gonna take your next color. Mine is white. You are going to
start at the bottom pin and stretch it to the one directly above it.Don't do any zig
zags or anything, cause that won't work either. And you just want to keep stretching bands.
Make sure that you don't skip any pins because that wont work either. You have to overlap
the bands. Like That. And you just want to keep doing that same pattern all the way to
the end of the loom. Don't Skip any Pins.Okay. Make sure you go all the way to the end. Don't
stop there cause otherwise the loops will fall off. Okay. Push down all of your bands
down on the loom. Now your gonna take your hook and start looping the Bands. Flip around
your loom so that there is a empty gap and there is no red arrow pointing away from you.
The red arrow is all the way over there and it's pointing towards you. So your gonna take
your hook and your gonna place inside your white chain through the middle and your gonna
stretch that out and your gonna grab the one underneath. Sometimes the white one falls
out, so make sure to hold it, and your gonna stretch that band to the pin above it. Make
sure you don't stretch it to the pin two above it, cause otherwise it's gonna stretch it
out to much, and it wont work. And the bands will probably snap or break, so that won't
work out. so your gonna take your next pin's one and your gonna stretch out the white one,
grab the red band underneath it, and stretch it to the next pin. Just keep doing that all
the way down. Okay. Now that we've looped the bands this is what it should look like.
The top looks exactly like all the other ones down on the bottom, except the very bottom.
it has 3 different bands on all of the different pins red, white, red. But all the others are
completely the same, as you can see. Okay. Now we are gonna finish off the bracelet.
Okay. Now you are gonna take these extra triangle bands and you are just gonna take them of
the outside pins, like that. Now you are gonna take your crochet hook through this really
thick loop on the arrow pin the farthest away it should be from you now. and you are gonna
put a band on your crochet hook after it is stuck through you are gonna pull it through
your crochet hook through all your other bands and you are gonna put your crochet hook back
through the other part of the band and now you are gonna pull of your bracelet. Okay.
this is what your bracelet should look like. If you messed up, rewind the video and start
over.Okay, Now you need to make an extension for bracelet. It's Obviously not going to
be long enough. If it is long enough you don't have to make an extension , but if your wrist
is a lot bigger like mine, you'll need to make an extension. Okay. First your gonna
take a band, put it on your hook, pull it through the loop that you have on your hook
and make a new loop. Let's watch that again. Put the band on your hook, pull your hook
through the loop on your hook and make a new loop.And you keep doing that until the extension
is long enough. This is long enough for me. Now, your gonna put your c clip onto your
bands on the hook. pull it so it is easier to put on. make sure that you don't put it
on the sides like that, go straight down into the bands like the crochet hook is holding
them. and then you can pull the bands off of the hook. Now your gonna take your c clip
that's attached to those bands, and put it to the other end. Your gonna slip that c clip
right on there. And there is only one more step! Wear it! Twist it on, and sometimes
the bands get a little off since they are only looped. So you might have to straighten
them out according to your liking, and there you have it! The new Swirlpool bracelet. Enjoy!
thanks for Watching!