Tip:
Highlight text to annotate it
X
Today on our 2013 Dodge Ram we'll be test fitting the Hollywood Racks Traveler Five
Bike Carrier, part number hr9200. Now to begin our test fit we'll slide the shank of
the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle
bolt through the pin holes and tighten with a wrench.Now that the Hollywood Racks Traveler
is secured to our Dodge Ram we'll go over a few clearance measurements to see how they
fit together. There's about 18 inches of ground clearance. The closest part of the
carrier to the closest part of the vehicle here at the rear bumper is about 12 inches.With
the cradle arms folded down we've added about 16 inches to the overall length of the
vehicle. We'll now loosen up the knobs on the left and right hand side of the carrier
to bring the cradle arms out. We'll then tighten them down securing the cradle arms
into position.