Tip:
Highlight text to annotate it
X
Today well be installing the Covercraft Seat Heater kit, part number SE1002. This kit will
work with the Seat Saver Seat Glove as well as most aftermarket seat covers. This kit
comes with two seat bottom and seat back envelopes as well as two seat bottom and seat back heating
elements. Our first step would be to install our heating elements into their envelopes.
Well then open the envelopes then well ensure that the blue side of the heating element
is facing up, and slide it into the envelope. Make sure the heating element is flat inside.
Then close the envelope over the top of the element. Well repeat this procedure for the
seat back. The envelope will securely hold the heating elements in place with a grip
material at the base and a layer of spacer knit fabric on the top. This will allow even
heat transfer. The use of the envelopes will still allow the seat savers and seat gloves
to remain machine washable when stored.With
everything assembled, we
can now install
them
on
the seat.