Tip:
Highlight text to annotate it
X
So before we turn this strap out to the right side of the fabric we need to press this seam
that we just made, open. And there's different ways you can do it. You can put it like this
and try to wrestle it down and do it like that but I like to just lay it on it's side
just the way we sewed it and basically just open one side up like that. And it just makes
it so much easier to press. Then you just press right along the side of it and just
open that seam up. There we go. There. We want to do that all the way to the top. And
the reason why we do this is when we flip this strap out to the right side we don't
want a bulky seam sitting right in the middle. We want it to lay nice and flat. There we
go, just right up the side. And if this takes you a little bit longer than it takes me that's
okay. Sometimes it's not very fun wrestling with the iron. There we go. Then we lay this
one open. There we go. And now that we have this seam pressed out what we're going to
do next is turn it to the right side and if you've never done this before, you know, you
might not know how to do this. But I have a little trick with a safety pin about how
to turn it to the right side. And I'll show you how to do that in the next clip. So, let's
get on to that next clip and we'll get this strap finished.