Tip:
Highlight text to annotate it
X
Alright guys this is my homemade
penny copper sorter I made
I was able to put together. bought this species on eBay for I believe was $39
dollars
this is an alumimum you get in any construction site
I show you what it is. This is a clothes that hanger
I cut so it will hold these two pieces together
The count is zero, zero. I think I have a few pennies and lets see if it works?
If it does work which it will, I break it down so you guys can see
each specie how it works
There it is I did 101 coins. It worked out work great
Alright lets put more coins on top
and lets see how the bottom piece works
It got stock right now,
but it works fine. There it is 133 coins.
my copper on the right my sink on the left
and let's break it apart so you can see what I did
and hopefully you can do this at home too. Here are some things I
need to add,
here is a typical clothes hanger I cut a piece to make this loop this is a piece you get from any
construction site
this is what i guess you put two??
work with drywall
hope you'll be able to use this too. Alright lets take it apart
a piece came out
and you can take a look at
what I did. there are two screws on the back
I drilled two holes in and screw in the mental
there the little Lup is hanging on top
and with the electrical tape I was able to cover the size
and this is what I did, is important that the
corners, the top
gruve is basically you see that is bending into the right. then there's a
tall piece and that is what stops the pennies from getting accumulating on top
took me a while to figure it out but its worked out great now
hope you enjoyed this video
this is homemade video & keep sorting your coins and hopefully
you built profit in the future for all your copper
coins. Take care this is Alex, i will post other
videos. If you have any comments or questions
just drop them off and I'll try to give you as much information
good luck take care. bye bye..